Matters needing attention during decoration commen

2022-07-22
  • Detail

1. Snap the line. Snapping the line during house inspection is a very important step. In order to ensure that the snapping line is more accurate, the workers of B & Q Anxi home will use a high-tech locator to find the required height on the wall, and then snap the line based on this. 2. Make external corners. Make external corner strips at the corners, which can ensure the absolute verticality of the wall

1 and snap lines. Snapping the line during house inspection is a very important step. In order to ensure that the snapping line is more accurate, the workers of B & Q Anxi home will use a high-tech locator to find the required height on the wall, and then snap the line based on this

2. Make external corner strips. Making external corner strips at the corners can not only ensure the absolute verticality of the wall, but also avoid daily collisions, which is an essential step

3. Measure the straight angle. Place a professional measuring instrument at the corner of the wall, and judge whether the internal and external corners are vertical from the numbers displayed on the tool to ensure accuracy

4. Measure the hollowing of the wall. In fact, there are a lot of hollows in the walls of many houses that seem to be neat in appearance, even at the heavy walls, which have great potential safety hazards. Therefore, the supervisors of B & Q Anxi home will carry out strict testing in order to be repaired in time before construction

5. Check the floor drain. Checking whether the floor drain is unobstructed is also an important step in the acceptance of the house. If there is a problem, you can contact the property to solve it in time. Otherwise, it is difficult to judge which party is responsible after the construction

6. Protect the entrance door. In order to avoid damage to the door during the construction process, the workers of B & Q Anxi home will use special door pockets and protective films to tightly wrap the door and handle

7. Supporting facilities. The workers of B & Q Anxin home will assemble a tripod at each construction site, which is specially used to stack light materials. The construction schedule is pasted under the center of the tripod, and the fire box is placed on the right

8. Protect the threshold and guide rail. For the original thresholds and guide rails retained on the site, the workers of B & Q Anxin home will temporarily customize a wooden protective cover with Blockboard to avoid the accumulation of dust and garbage during construction and damage it

9. Protect the floor drain. For each outlet pipe orifice on the site, the workers of B & Q Anxi home will seal it with a special protective cap to prevent dust and garbage from falling in during construction and blocking the pipe

成都外阴白斑医院

武汉妇科医院

郑州精神医院

南通男科医院

Copyright © 2011 JIN SHI